Filter
Top Products
©American Audio® - www.AmericanAudio.us - DLS 15™/DLS 15P™ - Instruction Manual Page 7
Rear Panel (DLS 15™ Only):
8. SPEAKON CONNECTIONS – The speaker includes a pair of Speakon type connections. You
may use both connections at once to loop speakers. These Be sure to use either the Speakon
type input connector or the 1/4” Phono input connector, never use more than one input con
-
nection at once. The Speakon connectors have a pin 1+ (hot) and 1- (ground) configuration,
pins 2+ and 2- are not used. For more wiring information regarding the Speakon connectors
see page 17.
9. 1/4” PHONO JACKS – The speaker includes a pair of standard 1/4” phono jacks. These jacks
are used for signal input and output. These jacks comes with a special locking clip that must
be pressed in to release the input plug, this features secures the input plug during heavy bass
response. The 1/4” jack has a tip positive and sleeve negative configuration.
10. POLE MOUNT LOCKING PIN – This pin is used to secure the speaker in place when mounting
the speaker in a pole mount configuration. Always be sure to tighten down on the locking pin
to prevent the speaker from shifting during use.
D
LS 15™/
D
LS 15P™ Controls and Features