18
ERROR MESSAGE & POSSIBLE SOLUTION
NO SIGNAL
1. Check that the signal-cable is properly connected , If the connector is loose, tighten the connector’s screws.
2. Check the signal-cable’s connection pins for damage.
INPUT NOT SUPPORT
Your computer has been set to unsuitable display mode ,set the computer to
display mode given in the following table.
APPENDIX
SPECIFICATIONS
Driving system
TFT Color LCD
LCD Panel
Size 55.8cm(22")
Pixel Pitch 0.282mm(H) × 0.282mm(V)
R,G,B Analog Interface
Video
Digital Interface