Filter
Top Products
Page - 8 Operator Manual – KLR Series Amplifiers
Copyright© 2010 – Ashly Audio Inc.
Connectors & Polarity
KLR-Series amplifiers utilize three types of professional audio connectors. For the inputs,
3-pin Euroblock connectors are utilized with their polarity clearly marked on the
amplifier’s rear panel, and combination XLR and 1/4” phone jack are all wired in parallel.
Outputs are via Speakon connectors. The polarity for these connections is marked on the
unit’s chassis. Note that polarity changes when the unit is operated in BRIDGED mode.
Be sure to read the Operation section of this manual for important information on the
operating modes.
Important Safety
Instructions – 2
Introduction - 3
The KLR Series - 4
Physical Description - 5
Installation – 6
Requirements
Installation Density
Typical Applications
Connectors & Polarity
Speaker Connections
Troubleshooting - 10
Spec Table - 11
Warranty - 12