Filter
Top Products
5
The DS-1
Atomic’s philosophy is to afford its’ customers the opportunity to choose the brand of modeler or
preamp that they prefer, and thus enjoy the sonic characteristics that they demand. The DS- 1
allows Atomic Reactor Series amplifiers to act as a platform for select digital amp modelers and
other types of related equipment. When using a modeler installed in the DS-1, all of the signal
input and output as well as the power supply connections are made (see page 5). No wall wart or
external power is required, the Reactor automatically selects and sends the correct power /
voltage to the modeler loaded into the DS-1. Installation and de-installation requires no tools.
The DS-1 is then loaded into the Reactor 112. The DS-1 design gives the user the ability to
“quick swap” (you don’t have to turn the Reactor on or off and wait for the tubes to come up to
speed) the Dock into and out of the Reactor. With the “quick swappable” capability designed into
the DS-1 you can quickly change Dock/modeler combination.
DS-1 (Top View) DS-1 (Bottom View)
Template Kits
The installation of your modeler into a Dock requires the proper matching template kit. Currently, the
following kits are available.
MODELER PART #
LINE 6 POD
ATP2
LINE 6 POD XT
ATPXT
BEHRINGER V-AMP
ATVAMP
BEHRINGER V-AMP 2
ATVAMP
VOX TONELAB
ATTLAB
M-AUDIO BLACK BOX
ATBBOX
For rack mount &
floorboard style
modelers and preamps
use the BLANK KIT. For
more info check out
pages 8, 12, 13, & 14.
ATBLANK
Template Kits are designed to adapt most popular
desktop modelers into the Atomic DS-1 Docking Unit.
A template kit consist of a pre-fitted, injection molded
frame and the appropriate mounting hardware to hold a
modeler securely in place inside the DS-1 docking unit.
The kit also includes the proper power connecting
cable for the modeler to allow the modeler to be
powered by the Atomic Reactor 112’s super high
quality power supply! NO WALL-WART NEEDED!