Filter
Top Products
6
REMOTE CONTROL OPERATION
(See Figure 3)
Monitor Controls:
1. TV POWER
Press this button to turn on the VOH1502.
Press the button again to turn the set off.
2. Direct Access (0-9,1--) Number Buttons
Use these buttons to select a channel. The
channel number chosen will be displayed
on the screen for about four seconds. To
select channels 0-99, press two number
buttons. For example, to select channel 8,
press 0,8. To select channels above 100,
press the 1—button, then the number
buttons for the last two digits of the
channel. For example, to select channel
115, press 1--, 1, 5.
3. CHANNEL p/q Buttons
Use these buttons to advance to the next
higher (p) or lower (q) channel. (Also
used to scroll Up/Down through the menu
options).
4. VOLUME + / – Buttons
Use these buttons to raise or lower the
volume level of the Wired Headphones or
External Speakers if installed. They are
also used to make adjustments in the
picture select mode.
NOTE: These buttons will not affect the
volume of wireless headphones or a wired
RF modulator. When using these devices
the volume must be adjusted with the
headphone volume control or with your
radio’s volume control.
5. MENU Button
Press the MENU button. The MENU
display appears. Use the channel p and
q buttons to highlight the desired function,
then press the ENTER button to confirm
your selection.
6. TV/VIDEO Button
Press this button to access the
AUDIO/VIDEO inputs. As the button is
pressed, the on screen display will cycle as
follows:
7. MUTE Button
Press this button to turn the TV sound off.
Press the button again to restore the sound
to the previously set level. MUTE may also
be released by pressing the VOLUME +/–.
8. ERASE/ADD Button
When tuned to a channel press this button
to store or erase the channel from memory.
TV
TV
AV 1
AV 2 AUX