Filter
Top Products
OPERATING INSTRUCTIONS
-3-
1 POWER ON-OFF BUTTON ( PWR )
Press this button to turn the unit on or off. If the ignition switch is
“on”, the unit will turn on automatically when a compact disc or
audio cassette is inserted.
2 AUDIO (LEVEL) CONTROL (VOLUME +/-)
To increase the volume level, turn the VOLUME +/- knob clock-
wise (+ direction). VOL will appear and the volume level will be
shown on the display panel from a minimum of V -- 0 to a
maximum of V -- 46. To decrease the volume level, turn the
knob counter-clockwise (- direction). The display will automati-
cally return to the normal indication 5 seconds after the last
volume adjustment or when another function is activated. This
control is also used in conjunction with the Select (SEL) control
button 3 to adjust the bass, treble, balance and fader levels as
described in 4, 5, 6 and 7.
3 SELECT (SEL) CONTROL BUTTON
This button is used to select the audio function (volume, bass,
treble, balance, or fade) whose setting is adjusted using the
VOLUME +/- control 2. Pressing the SEL button once will set
the unit for volume (VOL) adjustment as described previously.
Pressing the button additional times will select bass adjustment
(BAS will appear on the display panel) treble adjustment (TRE
on the display), balance (BAL), or fader (FAD). The display will
automatically return to the normal indication 5 seconds after the
last adjustment or when another function is activated.