Filter
Top Products
-6-
will flash during Pre-Set Scan operation). Press the button again
momentarily to stop Pre-Set Scan operation and remain on the
selected frequency.
Pressing and holding the button for longer than 2 seconds will
activate the Auto-Store (AS) Tuning feature which will
automatically scan and enter up to 6 local area stations into the
pre-set memories on the band in use. LOC will be displayed during
station selection. If you have already set the pre-set memories to
your favorite stations, activating the Auto-Store Tuning feature
will erase those stations and enter the new local ones. This
feature is most useful when traveling in a new area where you
are not familiar with the local stations.
bp STATION PRE-SET MEMORIES
To set any of the 6 pre-set memories in each band, use the
following procedure:
1. Turn the radio on and select the desired band.
2. Select the first station to be pre-set using the TUNE/TRACK
or Auto-Store (AS) Controls.
3. Press the pre-set button to be set and continue to hold it in
for approximately 2 seconds. The pre-set number (CH 1-6)
will appear on the display panel, indicating that the station is
now set into that pre-set memory position. The station can
now be recalled at any time by pressing that button.
4. Repeat the above procedure for the remaining 5 pre-sets on
that band and for the other 4 bands on the unit.
bq LIQUID CRYSTAL DISPLAY PANEL
The Liquid Crystal Display (LCD) panel displays the frequency,
time, and activated functions.
NOTE: It is a characteristic of LCD panels that, if subjected to
cold temperatures for an extended period of time, they
may take longer to illuminate than under normal
conditions. In addition, the visibility of the numbers on
the LCD may slightly decrease. The LCD read-out will
return to normal when the temperature increases to a
normal range.
br FUNCTION DISPLAY
The Function Display consists of a seven-section semi-circular
bar graph, with each section containing nine segments which
provide a visual representation of the volume level. The volume
level is represented by the number of segments in each graph.
As the volume is increased, the number of illuminated segments
will increase.
bs AUXILIARY (AUX) INPUT SELECTION
The radio is equipped with auxiliary audio input connectors
which can be interfaced to an external audio source. The
connectors are compatible with most CD and cassette players
or an MP3 digital audio playback unit. When the external source
is connected and the AUX button is pressed, only that media is
played by the radio; no other input sources (radio, cassette or
CD) are operative.