Filter
Top Products
-5-
9 AM/FM BAND SELECTOR (BAND)
During radio operation, each time this button is pressed, the
radio band is changed. The indication AM I, AM II, FM I, FM II
or FMIII will appear on the display panel according to your
selection. During disc or audio cassette play, pressing this button
will stop play of the disc or cassette and switch to radio operation.
The disc and/or cassette will remain in the machine without being
ejected. During this time, the and/or
T-IN
icons will
remain on the display panel to show that a disc and/or tape
cassette is still loaded in the unit. Press the disc play/pause
( ) button to return to disc play from the beginning of the last
track in play, or press the TAPE button to return to cassette play
from the beginning of the last track in play.
When AM I or AM II is selected, the stereo ( ) indication will
disappear from the display.
bl MANUAL UP/DOWN TUNING ( / ) / AUTOMATIC
SEEK TUNING
To manually select a radio station, momentarily press the Up Tuning
( ) side of the button to advance the unit two digits higher or
the Down Tuning ( ) side of the button to tune two digits
lower.
Pressing either side of the button for longer than 0.5 second
and then releasing will activate the Automatic Seek Tuning
function. The radio will seek the next station in the selected
direction and stop and remain at that frequency.
Pressing and holding either side of the button for longer than
0.5 second will cause the radio to continue tuning rapidly in the
selected direction until the next available station and momentarily
stop there. Tuning in the same direction will continue unless the
the button is released at the desired station.
bm LOCAL SELECTION (LOC)
This feature provides automatic selection of signals at which
the radio will stop during Auto-Store (AS) tuning; thus, only strong
(local) stations will be received and selected. When Auto-Store
(AS) tuning is not in effect, LOC will disappear from the display
panel, and the radio will stop at a wider range of signals, including
weaker (more distant) stations.
bn MONO/STEREO SELECTION (MO/ST)
During FM radio operation, this button is used to select mono or
stereo reception of the broadcast signal. Under normal
reception conditions, the unit should be left in the stereo mode
as indicated by the indication on the display panel when
tuned to an FM stereo signal. If the stereo signal is too noisy for
comfortable listening, press the MO/ST button to switch to
monaural reception (the indication will disappear from the
display). To return to stereo reception mode, press the button
again so that the indication reappears on the display.
bo PRE-SET SCAN (PS) / AUTO-STORE TUNING (AS)
Press this button momentarily to scan the stations pre-set into
each AM band and each FM band. The unit will stop at each
pre-set station for 10 seconds before continuing to the next
pre-set station (the pre-set station number on the display panel