Filter
Top Products
-7-
128-6115
7 of 16
Remote Controlled Monitor
Functions
1. POWER ON/OFF
Press this button to turn the VOH683 On. The
channel number or current video source will be
displayed on screen and the picture will appear
in a few seconds. Press the button again to turn
the VOH683 Off.
2. VOLUME UP/DOWN BUTTONS
Use these buttons to increase or decrease the
volume level of the headphone jacks or external
speaker if installed. They are also used to make
picture adjustments in picture select mode.
Note: These buttons will not affect the volume
of wireless headphones or a wired RF modulator.
When using these devices the volume must be
adjusted with the wireless headphone volume
control or with your radio’s volume control (see
page 13, Headphones and Wired FM Modulator).
3. PICTURE SELECT BUTTON
Each time this button is pressed, the on screen
picture adjustment display cycles through
“adjustment bars” for CONTRAST,
BRIGHTNESS, COLOR and TINT. Once the
desired adjustment bar is displayed, use the
VOLUME UP/DOWN buttons to adjust the
setting. The adjustment bar will automatically
turn off if no adjustments are made within 6
seconds, or if any other button is depressed.
4. VCP TV
/
VIDEO BUTTON
Press this button to control the functions on VCP
with tuner.
5. POD TV
/
AV BUTTON
Any video equipment connected to the AUDIO/
VIDEO inputs can be viewed on the monitor by
pressing this button. Each time the button is
pressed, the Audio / Video source will change in
the following sequence VIDEO 1, and VIDEO 2 .
Remote Controlled Radio Functions
6. FM RADIO POWER ON/OFF
Press this button to turn the FM Radio On. The
radio station frequency will be displayed on LCD
display window. Press the button again to turn
the FM Radio Off.
7. MUTE BUTTON (FOR FM RADIO)
Press this button to shut off the sound at the
headphone station for the FM radio audio only.
Pressing the button again restores sound to the
previously set level.