Filter
Top Products
-14-
128-6116
14 of 16
Video Output
The VOH684 provides a video output for an optional
video monitor(s). (Refer to page 7 of the installation
guide for more details.) This output will provide a video
signal that duplicates the signal displayed by the
VOH684
to an additional monitor or video display. Please see
your installer for more information.
Audiovox Video Cassette Player (Aux Video 1)
In most installations a VCP will be connected to the
“Video 1” input. To view a video cassette, turn the
VOH684 On and press the source button on its control
panel or the TV / Video button on the remote control
Wired FM Modulator
Your video system may be equipped with an RF
modulator, that allows you to listen to the VOH684’s
video audio signal by tuning your vehicle’s radio to the
selected frequency, (88.7 or 89.1 - Check with your
installer) and turning on the remote mounted RF
modulator switch. (In most cases this toggle switch
will be located underneath the driver’s side of the
dash, check with your installer for the exact location.)
Whenever the RF modulator is on, broadcast radio
reception of the vehicle’s radio will be diminished.
Setting the remote mounted toggle switch off will allow
normal radio reception.
Aux Video 2
The second video input may be connected to a DVD
player, video game system, or other audio/video input.
To play the Video 2 source, turn the VOH684 on and
press the source button on the VOH684 or the TV/
Video button on the remote control until “Video 2” is
displayed on the screen. Turn the source component
on with its power button or remote control. The
VOH684 is now ready to play the audio and video
signals from the source connected to video 2 inputs.
until “Video 1” is displayed on the screen. The VCP
may also be operated with the remote or the buttons
on its face. The VOH684 is now ready to play the
audio and video signals from the VCP if it is
connected to the “Video 1” input. Inserting a tape into
the VCP will turn it on and automatically activate the
play mode. If a rewound tape had already been loaded
into the VCP, prior to its activation press play on the
VCP or on the remote control to view the tape. For
more information see the operator’s manual
accompanying your VCP.