Filter
Top Products
107
Configuring your Xpress
RCi
Demo Mode
Your Xpress
RCi
has a demo mode that starts playing when the radio is not
yet activated and it’s either not receiving a signal or not connected to
the antenna. The demo mode disappears when the antenna is connected
properly or when the radio starts receiving a signal. After activation, the
demo does not appear under the above conditions.
If desired, you can put the Xpress
RCi
in demo mode after you have activated
the radio.
To enable or disable Demo Mode:
1 Make sure your Xpress
RCi
is not receiving a signal. Either cover the
antenna so it cannot receive a signal or disconnect the antenna.
2 Press menu.
3 Scroll to highlight Factory Settings and press the Select button.
4 Press the Select button to select Demo Mode. Demo Mode will
turn yellow.
5 Turn the Control knob to select:
•Turn clockwise to On to play the demo.
•Turn counter-clockwise to Off when you’re ready to turn the
demo off.
6 Press the Select button.