Filter
Top Products
112
If this happens: Try this:
No audio when using the Aux In
Cable or Cassette Adapter
•Check all cables between your Xpress
RC
i
and
your vehicle’s stereo system for a firm and
secure connection.
•Ensure you have selected the proper input
source on your vehicle’s stereo system.
•Ensure that the FM Transmitter in the Xpress
RCi
is turned Off, and increase the audio level of the
Xpress
RCi
. Refer to “Set Audio Level” on page 97.
Audio fades or has static when
listening
•Check all cables for a firm and secure connection.
•If you are using PowerConnect (or FMDA) to
listen via your vehicle’s FM radio, and the
problem persists, it most likely is interference
from another commercial or broadcast FM
station. You will need to find an unused or
available FM channel in your area. Refer to “Find
Available FM Channels in Your Area” on page 89.
•If you are using PowerConnect, and you cannot
solve the audio problem, try connecting the
audio using the Aux In Cable or a Cassette
Adapter. (Refer to page 41 and page 44.) If you
cannot use those solutions, consider using an
FM Direct Adapter. (Refer to page 51.)
Troubleshooting