Filter
Top Products
Jump
Pressing on the remote causes the radio to
revert
to the last channel selected immediately
prior
to the current selection. A second press of
returns
you to the original channel played
prior
to initiating the jump process. With this
feature,
you can cycle back and forth between
two
channels.
Scan
You can scan through channels in one of the
following
ways:
Scan presets
When
in the PRESET mode (in preset bank A, B or
C),
pressing scrolls you through the preset
channels
in the active bank only. The unit scans
channels
beginning with the next preset higher in
number
than the current preset.
Scan Category
When
in the CATEGORY SEARCH mode, pressing
scrolls
you through the channels in the
current
category only, beginning with the next
higher
channel than the current channel.
Scan All
When
in DIRECT mode, pressing scrolls you
through
all channels, beginning with the next
higher
channel than the current preset.
Each channel scanned will play audio for 5 seconds
after
which the radio tunes to the next channel in
the
scanning order. To lock onto a particular
channel,
press or within 5 seconds.
Locking
onto a channel automatically exits you
from
the scan mode. You can also exit the scan
mode
without making a selection by pressing any
of
the following , or .
XMCommander
returns to the mode in which it
operated
prior to entering scan mode.
s e c t i o n 4
8
Special Features
TuneSelect™ — New Feature!
TuneSelect is a new XM feature which allows you
to
“tag” up to 15 songs you like and have your XM
Radio
alert you when any of those songs is playing
on
a different channel.
Activating
TuneSelect
To activate TuneSelect, press and hold the ENTER
button
at anytime during the playing of a
particular
song. When TuneSelect is activated, you
will
hear a beep and Song Selected will be
displayed
on the screen for 2 seconds and then the
unit
will revert to the previous screen information.
When
one of your designated songs begins playing
on
any other channel, your unit will beep and
SONG
FOUND and the channel number and song
name
will display on the screen. To go to that
song,
simply press the ENTER button. If no
action
is taken within 8 seconds, your unit will
revert
to the previous screen information of the
currently
selected channel and TuneSelect will be
de-activated
for that song only until the unit is
powered
off and powered on for the next listening
session.
Managing
TuneSelect Songs
To erase some or all of the songs identified in
memory
with TuneSelect, press the DISP/MENU
button
and using the tuning wheel, scroll to
the
TuneSelect option. Press ENTER to select.
You will have the option to erase all songs or only
selected
songs. TuneSelect can accommodate up
to
15 selections. Once 15 songs are selected,
adding
new songs will automatically replace the
oldest
song in the list.