Filter
Top Products
MFCD 1219 User's Guide 15
Clock Menu
Function Description
OSD Position To display the OSD to your preferred
position.
Clock To adjust the function only when
characteristics are blurred.
Clock Phase To adjust ADC sampling clock phase.
Main Menu To return to Main Menu.
To perform the Autobalance function, you need
to select a proper test pattern before performing
the function.
Proceed as follows:
1 You must have installed the Barco
NioWatch software.
2 Right-click on the NioWatch systray icon.
3 Select Test Patterns from the pop-up
menu.
4 Select the SMPTE test pattern.
5 Now perform the function Autobalance
from the MFCD 1219 control panel.
6 When finished, click on the test pattern to
close it.
Clock Menu
- (Down) + (Up)
OSD Position
Clock 1344
Clock Phase
4
Main Menu >
A1 1024 x 768 - 60.1 48.4k