Filter
Top Products
MFCD 1219 User's Guide 8
• Keep your original packaging. It is
designed for this display and is the ideal
protection during transport.
• Avoid reflections in the flat panel to reduce
eye strain.
• Place the display on a strong and stable
table or desk.
• Keep the display away from heat sources
and provide enough ventilation in case it is
built in a rack or console.
• Make sure computer and display are
switched off before connecting the signals.
2.2 Wall mounting
You can mount the panel to the wall instead of to
the foot, by means of the supplied mounting
plate. If you do not need to mount the panel to the
wall, please skip this item.
Step 1: Remove the panel from the foot
1 Position one hand under the panel at the
front side. Position the other hand at the
rear, under the push-button with BARCO
logo (9).
2 Firmly press down the push-button (9) with
one hand while carefully lifting the panel up
with the other hand.
3 Remove the panel from the foot.
Step 2: Fix the mounting plate to the wall
1 Screw the mounting plate to the wall with
the 4 supplied screws (A).
2. INSTALLATION
2.1 Precautions