Filter
Top Products
7 U-CONTROL UCA202 User Manual
The current supply is made via the USB connecting cable,
so that there is no external power supply unit required.
Allrequired safety precautions have been adhered to.
1.1.3 Online registration
Please register your new BEHRINGER equipment right after
your purchase by visiting http://behringer.com and read the
terms and conditions of our warranty carefully.
Should your BEHRINGER product malfunction, it is our intention
to have it repaired as quickly as possible. Toarrange for
warranty service, please contact the BEHRINGER retailer from
whom the equipment was purchased. Should your BEHRINGER
dealer not be located in your vicinity, you may directly contact
one of our subsidiaries. Corresponding contact information is
included in the original equipment packaging (Global Contact
Information/European Contact Information). Should your
country not be listed, please contact the distributor nearest
you. Alist of distributors can be found in the support area of
our website(http://behringer.com).
Registering your purchase and equipment with us helps us
process your repair claims more quickly and eciently.
Thank you for your cooperation!
2. System Requirements
◊ The UCA202 is PC and Mac-compatible.
Therefore, no installation procedure or drivers are
required for the correct functioning of the UCA202.
To work with the UCA202, your computer must fulll the
following minimum requirements:
2.1 Hardware connection
Use the USB connecting cable supplied with the UCA202 to
connect the unit to your computer. The USB connection also
supplies the UCA202 with current. You can connect a variety of
devices and equipment to the inputs and outputs.
PC MAC
Intel or AMD CPU, 1 GHz or higher G4/G5, 800 MHz or higher
minimum 512 MB RAM minimum 512 MB RAM
USB 2.0 interface USB 2.0 interface
Windows XP SP2
Mac OS X 10.3.9 (Panther)
orhigher