Blaupunkt 7 641 802 310 Car Stereo System User Manual


 
52
CD changer mode
(optional)
To find out which CD changers / Com-
pact Drive can be used with this unit,
please refer to the "Accessories" chap-
ter in these instructions or contact your
Blaupunkt dealer.
Note:
Information on handling CDs, inserting
CDs and operating the CD changer can
be found in the operating instructions
supplied with your CD changer.
Information on using the Compact Drive
MP3 and recording music tracks onto it
can be found in the operating instruc-
tions supplied with the Compact Drive
MP3.
Switching to CD changer mode
Keep pressing the SOURCE but-
ton ; until CD changer mode is
displayed.
Playback continues from the point at
which it was last interrupted. If the mag-
azine was removed from the CD chang-
er and then replaced, the CD magazine
will first be scanned, and playback will
begin from the first track on the first CD
that the CD changer detects.
Selecting CDs
To move up or down to another CD,
press the softkey 4 assigned to
the display item of the CD (CD1
CD10) that you require. To do so,
you might need to switch to the
second page of the main CD-
changer menu using the NEXT
button 3.
or
keep pressing the joystick 7 up or
down until the number of the re-
quired CD appears in the display.
Selecting tracks
To move down or up to another track
on the current CD,
repeatedly press the joystick 7 to
the left or right until the number of
the required track appears in the
display.
If you press the joystick 7 once to the
left, the current track will be played again
from the beginning.
Fast searching (audible)
To fast search backwards or forwards,
press and hold the joystick 7 to
the left or right until fast searching
backwards / forwards begins.
Repeating individual tracks or
whole CDs (REPEAT)
Press the MENU button 8.
Press the softkey 4 assigned to
the CDC display item.
The CD changer functions menu opens.
Press the softkey 4 assigned to
the RPT display item.
RPT TRCK appears briefly in the dis-
play.
To repeat the whole CD,
press the softkey 4 assigned to
the RPT display item again.
RPT CD appears briefly in the display.
CD CHANGER MODE