Filter
Top Products
82
TIM
tion is activated, the device will auto-
matically search for a traffic information
station.
Setting the timers
If TIM is activated, the traffic informa-
tion messages provided by a tuned traf-
fic information station will be recorded
for 2 hours after the device is switched
off. Furthermore, you can set two tim-
ers that record all the traffic information
messages received 30 minutes before
and 90 minutes after the set time. The
timer function uses the system time as
its reference. For details on setting the
system time, please read the chapter
entitled “CLOCK - time”.
To set one of the timers,
➮ whilst you are in radio mode, press
and hold down the TUNER button
= for longer than two seconds.
The TIMPLAY menu is displayed.
➮ Press the NEXT button 4.
The TIMSET menu is displayed.
➮ Press the softkey 5 assigned to
the “TIMER1” display item for the
first timer or “TIMER2” for the sec-
ond timer.
The set time appears in the display, and
the hours flash.
➮ Move the joystick 8 up or down to
adjust the hours.
➮ Move the joystick 8 to the right to
change the input position.
The minutes flash.
➮ Move the joystick 8 up or down to
adjust the minutes.
To save the settings,
➮ press the TUNER button = or the
joystick OK 8.
The settings are saved.
Whilst TIM standby is activat-
ed, an electric antenna that is con-
nected to the device will remain ex-
tended.
Note:
● Before you drive into a carwash,
please make absolutely sure you
switch off TIM. For further details,
please read the section entitled
“Switching off TIM” in this chapter.
Selecting a timer
Once you have set the timers, you can
then select which of the two timers to
activate. Generally, the timer that you
adjusted last is active.
To select a timer,
➮ whilst you are in radio mode, press
and hold down the TUNER button
= for longer than two seconds.
The TIM PLAY menu is displayed.
➮ Press the NEXT button 4.
The TIMSET menu is displayed.
➮ Press the softkey 5 assigned to
the “TIMER1” display item to select
the first timer or “TIMER2” to select
the second timer.
➮ Press the TUNER button = or the
joystick OK 8.
The settings are saved.