Filter
Top Products
106
External audio sources
You can connect up to two external au-
dio sources to the device. Audio sourc-
es can, for example, be portable CD
players, MiniDisc players or MP3 play-
ers.
You can connect the first external au-
dio source (AUX1) instead of a CD
changer.
You can connect the second external
audio source (AUX2) in addition to the
CD changer or AUX1.
Instead of AUX2, you can connect a
navigation system. For further informa-
tion, please read the section entitled
“Navigation audio” in the “Adjusting the
volume” chapter.
In order to be able to use the AUX in-
puts, you must activate them in the set-
up menu.
If you want to connect an external au-
dio source, you will need an adapter
cable. You can obtain this cable from a
Blaupunkt dealer.
Switching the AUX input on/off
➮ Press the MENU button 9.
➮ Press the softkey 5 assigned to
the “AUX” display item.
The AUX menu is displayed.
➮ Press the softkey 5 assigned to
the “AUX1” display item if no CD
changer is connected and you
want to connect an external audio
source.
EXTERNAL AUDIO SOURCES
By pressing the “AUX1” softkey
you can switch between the “AUX-
ILIARY 1 ON” and “AUXILIARY 1
OFF” settings.
➮ Press the softkey 5 assigned to
the “NAV/AUX2” display item if no
navigation system is connected
and you want to connect an exter-
nal audio source. By pressing the
“NAV/AUX2” softkey you can
switch between the “AUXILIARY 2
ON” and “NAVIGATION ON” set-
tings.
Note:
● If a CD changer is connected, you
cannot change the “AUX1” input.
➮ Press the joystick OK 8 or the
MENU button 9 to close the
menu.
The settings are saved.
Note:
● If the AUX inputs are activated, you
can select them by pressing the
SOURCE button <.
Naming the AUX input
You can give each AUX input a name
so you can recognise them more easily
when selecting them using the
SOURCE button < (e.g. you can give
them the device names that they are
connected to).
➮ Press the MENU button 9.
➮ Press the softkey 5 assigned to
the “AUX” display item.
The AUX menu is displayed.