Filter
Top Products
41
ENGLISH
DEUTSCH
FRANÇAIS
ITALIANO
NEDERLANDS
SVENSKA
ESPAÑOL
PORTUGUÊS
RADIO OPERATION
➮ To switch between memory levels
and wavebands, briefly press the
BND/TS button 5.
Setting the Station
There are a number of ways to set the
station.
Automatic Station Search
➮ Press the or button :.
The next station that can be received is
tuned in.
Manual Station Tuning
To tune to a station manually
➮ Press the or button :.
Note:
Manual station tuning is only possible
when the RDS convenience function is
switched off.
Browsing a chain of stations
(FM only)
If a station provides several programs,
it is possible to browse through this
“chain” of stations.
➮ Press the or button : to
change to the next link in the sta-
tion chain.
Note:
To use this function, the RDS conven-
ience function must be active.
This means you can only switch to a
station you have already received at
least once. Use the Scan or Travelstore
function for this purpose.
Adjusting Station Search
Sensitivity
You can choose whether to search only
for stations with strong signals, or wheth-
er weak stations should be included.
➮ Press the MENU button 8.
➮ Press the button : until “SENS”
appears in the display.
➮ Press the button :.
The current sensitivity level appears in
the display. “SENS HI6” means maxi-
mum sensitivity, “SENS LO1” means
minimum sensitivity. When “SENS LO”
is selected, the display shows “lo”.
➮ Set the desired sensitivity with the
buttons :.
➮ When the setting process is com-
plete, press the MENU button 8
or OK ;.
Saving Stations
Saving a Station Manually
➮ Choose between memory levels
FM1, FM2, FMT or the MW and
LW wavebands.
➮ Tune to the station you want.
➮ Choose one of the station buttons
1 - 6 > on which you want to store
the station and hold it pressed for
longer than 2 seconds.