Filter
Top Products
39
ENGLISH
DEUTSCH
FRANÇAIS
ITALIANO
NEDERLANDS
SVENSKA
ESPAÑOL
PORTUGUÊS
VOLUME ADJUSTMENT
fic announcement is not reproduced
until the call or the speech output has
finished.
If a call is received or if the navigation
system begins speaking during a traffic
announcement, the announcement is
reproduced. The telephone call or
speech output can be heard when the
traffic announcement has finished.
The volume at which navigation output
or telephone calls start is adjusted as
follows:
➮ Press the MENU button 8.
➮ Press the button : until “TEL/
NAVI VOL” appears in the display.
➮ Set the desired volume with the
buttons :.
➮ When the setting process is com-
plete, press the MENU button 8
or OK ;.
Note:
You can adjust the volume level of tele-
phone calls and of speech output as
they are made with the volume control
2.
Automatic Sound
This function adjusts the volume of your
car radio automatically to your driving
speed. This requires your device to be
connected as described in the installa-
tion guide.
The automatic volume booster can be
set in six stages (0-5).
➮ Press the MENU button 8.
➮ Press the button : until “AUTO
SOUND” appears in the display.
➮ Set the volume adjustment with the
buttons :.
➮ When the setting process is com-
plete, press the MENU button 8
or OK ;.
Note:
The right speed-adjusted volume set-
ting depends on noise levels inside your
car. Try various values (0-5) until you find
the best setting.
Adjusting the Volume of the
Confirmation Tone
With certain functions, if you hold a but-
ton pressed for longer than 2 seconds
(e.g. when saving a station frequency
on a station button) a confirmation tone
(or beep) is heard. To adjust the volume
level of the beep:
➮ Press the MENU button 8.
➮ Press the button : until “BEEP”
appears in the display.
➮ Set the desired volume with the
buttons :.
“0” means no beep, “9” means
maximum beep volume.
➮ When the setting process is com-
plete, press the MENU button 8
or OK ;.