54
EQUALIZER
Switching Loudness
On / off
Loudness refers to boosting the bass
and treble at low volume levels to match
the ear’s sensitivity.
➮ Press the AUD/LD button = for
about 2 seconds.
If loudness is switched on, LD shows in
the display.
Setting Loudness Intensity
The loudness boost can be set in steps
from one to six.
➮ Press the MENU button 8.
“MENU” appears in the display.
➮ Press the button : until “LOUD-
NESS” appears in the display.
➮ Press the or button : to ad-
just the boost.
➮ When the setting process is com-
plete, press the MENU button 8
or OK ;.
Equalizer
This device is equipped for automatic,
digital sound measurement, using three-
self-gauging 5-band equalizers.
Using the microphone included,
the settings for equalizers USER 1 -
USER 3 can be measured automatical-
ly.
In addition, the automatically measured
values can be adjusted and the equal-
izer can be set manually.
The device also has a parametric 5-
band digital equalizer and six sound
presets.
Switching Equalizer On / Off
➮ To switch the equalizer on, hold
down the DEQ+ button < until
“EQ ON” flashes up and DEQ ap-
pears in the display.
➮ To switch the equalizer off, hold
down the DEQ+ button < until
“EQ OFF” flashes up and DEQ dis-
appears from the display.
Automatic Sound Measurement
You can make and store electronic
measurements for three different situa-
tions/users, for example:
USER 1 driver alone
USER 2 driver and passenger
USER 3 front and back seats occu-
pied
While the measurements are being
made, hold the microphone in the cor-
responding position.
LOUDNESS
