Filter
Top Products
15
ACM 5450
ENGLISH
DEUTSCH
FRANÇAIS
ITALIANO
NEDERLANDS
SVENSKA
ESPAÑOL
PORTUGUÊS
5 Cassette removal
Press
.
6 Cassette loading slot
Insert tape (side A or 1 up; the open
side facing to the right).
7 Change of tape direction /
Fast winding
To switch to the other side of the
cassette tape:
Press both buttons simultaneously.
The display shows “TR1-PLAY” or
“TR2-PLAY”.
Fast winding
FR: Fast rewind; stop by pressing FF.
FF: Fast forward; stop by pressing FR.
8 1, 2, 3, 4, 5 - preset buttons
You can store five stations on each FM
memory bank (I, II and “T”).
To store a station: Press button during
radio operation and hold down until the
radio resumes play after the muting and
a beep sound is heard.
Short instructions
1 On / Off:
Turn the knob.
On
Off
To adjust the volume:
Turn the knob.
2 SRC (Source)
To toggle between the connected audio
sources, e.g. tape, radio, AUX or CD
changer (optional).
3 AUD – audio
To adjust the
BASS
TREBLE
BALANCE (left/right volume)
FADER (front/rear volume).
To alter a setting:
Toggle the AUD button until the corre-
sponding abbreviation and the adjusted
value appear in the display.
Use the buttons to alter the selec-
ted setting. The adjusted value is indi-
cated in the display.
The last setting will be stored automati-
cally.
If the setting remains unchanged within
8 seconds, the display will switch back
to the previous condition.
4 lo
lo (local) - To alter the seek tuning sen-
sitivity during radio operation.
If “lo” is displayed, the radio will only
pick up strong, local stations (normal
sensitivity).
If “lo” does not light up, the radio will
also pick up weaker, distant stations
(high sensitivity).
If the display shows “m”, manual tuning
is adjusted.
To toggle the function: Press lo
briefly during radio operation.
Extra function:
To switch between stereo and mono:
Hold down the button for approximately
2 seconds. With stereo playback, the
stereo sign “
” will appear in the dis-
play.