Filter
Top Products
34
Cassette deck operation
Cassette playback
Insert the tape into the slot with the open
side showing to the right. "CASSETTE" will
appear in the display. The tape will play in
the direction "TAPE 1".
If a tape is already inside, press SRC to
select "CASSETTE" mode. The tape will
play in the direction last selected.
Reversing the tape
Press to change the tape direction du-
ring cassette playback from TAPE1 to
TAPE2 or vice versa:
At the end of the tape, the unit will automa-
tically switch to the opposite side.
Skipping cassette titles
CPS stands for Cassette Program Search
and allows you to skip over songs on the
tape.
The titles must, however, be separately by
at least 3 seconds of blank tape.
During tape playback press either
or
on the rocker switch to activate the CPS
mode. "CPS FF" or "CPS FR" will appear
in the display. Press the button / repea-
tedly to skip the corresponding number of
titles in either direction.
Switching the warning beep off
a) Tune into another station offering traffic
information:
• Press the rocker switch or
• press a preset button which has a traffic
programme station allocated to it.
Alternatively:
b) Switch off the priority for traffic an-
nouncements:
• Press TA.
"TA" will disappear from the display.
Automatic seek tuning start
(Cassette mode)
If you leave the reception area for the traf-
fic programme station you have tuned into
while you are listening to a cassette, the
system will automatically start searching for
a new traffic programme.
If no such station is found within approx.
30 seconds, a warning beep will sound eve-
ry 30 seconds. To switch the warning beep
off, press TA button.
Adjusting the volume for traffic
announcements and the
warning beep
Although this volume was preset at the fac-
tory, you can use the DSC function to alter
the setting (see "DSC programming - TA
VOL").
The number of titles to be skipped will ap-
pear in the display and count down until the
title selected has been reached.
Press
or << >> to stop the function.
Scan
To scan all of the songs on a tape, press
SCA. "SCAN" will appear in the display.
All of the titles on the tape in the tape deck
will be scanned briefly one after the other.
Press SCA again to switch the SCAN
function off. The title currently playing will
continue to play.
Fast winding
Use the rocker switch to fast forward or
rewind the tape during cassette operation:
>> forward
<< rewind.
"FORWARD" or "REWIND" will light up in
the display.
Press the button indicating the opposite di-
rection or
/ to stop the function.
If you have activated "Radio Monitor ON",
the unit will play the radio station last sel-
ected while the tape is winding. You can
alter the Radio Monitor setting in DSC
mode.
Cob/Portof/Colo gb® 30.05.2002, 10:16 Uhr34