Filter
Top Products
35
Frankfurt RCM 104
DEUTSCH
ENGLISH
ITALIANO
PORTUGUES
NEDERLAND
ESPAGÑOL
SVENSKA
FRANÇAIS
Station naming
Using the ST NAME item of the DSC menu
you can enter a name with a maximum of 8
digits for all stored frequencies of memory
banks I and II.
Most of the FM stations are RDS stations, the
names of which will be shown in the display.
The displayed RDS name has priority over all
entries specified by the user. If you have
named an RDS station, this name will only be
shown briefly and be replaced by the RDS
name afterwards.
For this reason we recommend that you only
name non-RDS stations, which only show
their frequency but not the name.
All long-wave stations are provided with a
station name at the factory.
To start your entry:
• Choose a station,
• press DSC,
• select item “ST NAME” with rocker
switch
/ and
• press -dB.
The first position is flashing.
• Now select a character with rocker
switch
/ .
You have the choice between the capital
letters (A-Z), special characters and the
numbers (0-9).
• Use the rocker switch << >> to move to
the next position and select a charac-
ter.
In this way, up to 8 characters can be en-
tered.
Once you have completed the name as desi-
red,
• press -dB;
now the entry has been stored.
The display returns to “ST NAME”.
To name the next station:
• Select it with one of the preset buttons
(1-6); if required, change the memory
bank and/or waveband.
Then start to enter the next name.
To finish the entry,
• press DSC.
You will leave the DSC menu at the
same time.
Any name entered for a preset station will be
deleted by re-assigning it (either with a name
or frequency).