Filter
Top Products
41
Frankfurt RCM 104
DEUTSCH
ENGLISH
ITALIANO
PORTUGUES
NEDERLAND
ESPAGÑOL
SVENSKA
FRANÇAIS
Care of your audio equipment
We recommend that you use only C-60/C-90
cassette tapes in your car radio. Store your
cassettes in a cool place away from dirt, dust
and temperatures exceeding 50 °C. During
cold weather, allow very cold cassettes to
warm up before playing them in order to
avoid uneven tape transport. Operating pro-
blems and sound distortions may occur after
approximately 100 hours of playing time and
are caused by dust particles which adhere to
the rubber roller and the audio head.
Use a cleaner cassette to remove normal dirt
build-up. For tougher cases, use a cotton
swab (Q-tip) soaked with alcohol. Do not
attempt to clean the mechanism by inserting
a hard object into the player!
DSC programming
Using DSC (Direct Software Control), you
can adjust certain settings and functions for
this car radio to your own liking and then store
them.
The basic settings for this audio equipment
have been made at the factory. Please refer
to the following overview for these settings so
that you can always reset to these if desired.
If you wish to alter any of the programming,
• press button DSC.
Use the rocker switch and the -dB button to
make your selection from the following
functions and to carry out the desired adjust-
ments. The current setting for that function
will appear in the display.
Select function
Set
value
Select function
Set
value
Skipping unrecorded tape sec-
tions with BLS - Blank Skip
As soon as the system detects a blank tape
section of more than 15 seconds, the casset-
te will automatically be fast forwarded to the
beginning of the next track.
The display will then show “CPS-FF”.
To switch BLS on/off:
• Press BLS.
If the function is active, “BLS” appears in the
display.
Listening to the radio during fast
winding with RM (Radio Monitor)
When the tape is fast forwarded or rewound
(also with CPS, SCAN, BLS), the radio is
normally muted. To listen to the radio during
fast winding:
• Press RM.
“RM” lights up in the display.