Filter
Top Products
29
Frankfurt RCM 104
DEUTSCH
ENGLISH
ITALIANO
PORTUGUES
NEDERLAND
ESPAGÑOL
SVENSKA
FRANÇAIS
B Tape side selector
Press
to switch over during tape
operation. The display shows “TR 1”
(track) or “TR 2”.
C MIX
see chapter “CD changer control”.
D BLS (Blank Skip)
Use this function to skip blank sections
of the tape.
As soon as an unrecorded portion of
more than 15 seconds is detected du-
ring playback, the system will automati-
cally forward the tape to the beginning
of the next title.
In this case, the display will show
“CPS-FF”.
To switch BLS on/off: Press the BLS
button.
When the function is active, “BLS” will
light up in the display.
E lo
To change the seek tuning sensitivity.
lo lit up in the display indicates normal
seek tuning sensitivity (the system will
pick up all powerful, nearby stations).
lo off indicates high seek tuning sensiti-
vity (the system will also pick up wea-
ker stations).
To change the seek tuning sensitivi-
ty: Press lo.
F DSC (Direct Software Control)
Use the DSC function to adapt a num-
ber of programmable basic settings to
suit your listening preference. For more
information, read through chapter “DSC
programming”.
G LD (loudness)
Use this function to boost the low fre-
quencies for more bass, especially at
low volume levels.
To switch LD on/off: Press the button.
For more information, see chapter
“DSC programming”.
H AUD
To adjust the treble and bass frequen-
cies using the rocker button.
Treble
+
Bass
Bass
Treble
+
The last setting will be automatically
stored.
If the setting remains unchanged within
8 seconds, the display will switch back
to the previous indication.
I GEO
To adjust the Balance (left/right) and
Fader (front/rear) settings.
Balance
left
Fader rear
Fader front
Balance
right
The last setting will be stored automati-
cally.
If the setting remains unchanged within
8 seconds, the display will switch back
to be previous indication.