Filter
Top Products
Paris RCM 104
32
DSC programming
This car radio offers direct software control
(DSC), which allows you to adapt a number
of default settings to your preference and to
store these values.
In the following you will find an overview of all
the default settings adjusted at the factory.
To change a programmed parameter,
• press DSC.
Then use the rocker switch and the -dB
button to select and change the functions
described below. The display shows the ad-
justed status.
Select function
Select function
Change-
setting
Change-
setting
CD NAME Use this function to name
your discs (see also CD
changer control, “Entering/
displaying CD names”)
ANGLE Use one of the values -1, 0,
or +1 to adapt the individual
viewing angle.
Adjust the ANGLE so as to
provide the best view.
BEEP Acknowledgement tone for
all functions where the re-
spective button has to be
held down for more than 2
seconds to activate the
function.
Adjust volume between 0
and 9 (0 = OFF).
BRIGHT The display brightness can
be adjusted between 1 and
16. You may set one day
and one night adjust-
ment.Brightness of night
illumination:
Switch on the vehicle’s li-
ghting system and program
the brightness value. For
this, the lighting connector
has to be connected to the
electric system of the car.
COLOUR
(Variocolour)
To gradually match the co-
lours of the car radio and
dashboard lighting to each
other.
green .............bright orange ............... red
CD DISP During CD operation, use <<
>> to select between the
following displays:
NAME –
the name specified with CD
NAME.
TIME –
the playback time of the title.
NUMBER –
disc and track number.
LED ON You can select between LED
ON and LED OFF. When
setting LED ON, the Key-
Card tongue will flash for
optical theft protection when
the set is switched off and
the KeyCard removed.
(only, if
changer is
connected)
(only, if
changer is
connected)