Blaupunkt RCM 126 Car Stereo System User Manual


 
39
ENGLISH
DEUTSCH
FRANÇAIS
ITALIANO
NEDERLANDS
SVENSKA
ESPAÑOL
PORTUGUÊS
For this purpose, you may start Travelstore
seek operation:
Press FM for two seconds; the system
starts to run through the frequency
band.
If “AF” does not light up,
press AF.
With this, the requirements for selecting sta-
tions with << >> are fulfilled.
Changing the memory bank
You can shift between the memory banks I,
II and T in order to store stations and recall
them later.
The currently selected memory bank is in-
dicated in the display.
Press the FM button as many times
until the desired memory bank lights
up in the display.
Storing stations
On FM, you can store six stations on the
preset buttons 1 to 6 for each of the memo-
ry banks I, II and T.
Select the desired memory bank.
Tune in a station with the rocker switch
(either automatically or manually).
Press the desired preset button until
the radio resumes play after the mu-
ting (takes approximately 2 seconds,
confirmed by beep).
Now the station has been stored.
The activated preset button is indicated in
the display.
Notice:
Should you tune in a station which has al-
ready been stored before on another
memory bank, the corresponding preset but-
ton and the memory bank will briefly flash in
the display.
Automatically storing the stron-
gest stations with Travelstore
You can automatically store the six most
powerful FM stations of your current recep-
tion area sorted according to their signal
strength. This function is particularly con-
venient on longer trips.
Press the TS button for two seconds.
“T-STORE” will appear in the display.
The six strongest FM stations will be auto-
matically stored on the memory bank “T”
(Travelstore). When this process has been
completed, the radio will play the first sta-
tion.
Manual tuning with << >>
You can also tune in a station manually.
Condition:
AF and PTY must be switched off (i.e. the
symbols do not light up in the display).
If necessary, deactivate these functions:
Press AF or PTY.
Manual tuning:
Press << >>; the frequency will change
in short intervals in downwards or up-
wards direction.
When holding the right or left part of the rock-
er switch depressed, the frequency scan is
speeded up.
Scrolling through the broad-
casting networks
You can use the << >> buttons to tune in
stations of your reception area.
If several programmes of the broadcasting
networks can be received, you can scroll
through them in forwards direction pressing
>>, or backwards using the << button, e.g.
NDR 1, 2, 3, 4, N-JOY, FFN, ANTENNE ...
For this it is necessary that the stations have
been tuned in at least once and that “AF” is
active (lights up in the display).
Heidelbg RCM126 gb® 07.06.2002, 12:46 Uhr39