Filter
Top Products
44
Tape operation
The car stereo has to be switched on.
The unit automatically switches to tape ope-
ration when a cassette is inserted.
Inserting a tape
• Turn on the set.
• Insert a tape.
The tape will be automatically transported
to the playback position. Side A or 1 starts
to play.
During tape operation, “TR 1” or “TR 2”
(track) will show on the display panel.
Insert the tape with side A or 1 facing up, the
open side showing to the right.
Removing a tape
• Press .
The cassette will eject.
Adjusting the volume for traffic
announcements and the warning
beep
This volume was preset at the factory,
though you can alter the value using the
DSC function (see “DSC programming, TA
VOL”).
Adjusting GEO for traffic messa-
ges and the warning beep
You can separately adjust the balance and
fader settings for both traffic announcements
and the warning beep.
For example, it is possible to listen to traffic
reports via the front left (right) speaker only.
This provides the driver with the important
traffic information without bothering the rear
passengers too much.
To make a setting:
• During an announcement, adjust the
balance and fader settings to suit your
personal preferences.
Fast Forward/Rewind
Fast forward
Fast rewind
/ Title selection (S-CPS) Up
Down
Stop function by pressing .
Selecting titles with S-CPS
(Super Cassette Programme Search)
Use this function to skip (
) and repeat ( )
recorded titles.
A maximum of nine titles can be skipped.
To do so,
• press the rocker switch as many times
as required.
The number of titles to be skipped appears
on the display panel.
If necessary, you can correct your entry by
pressing the opposite rocker switch button.
Stop by pressing
.
Heidelbg RCM126 gb® 07.06.2002, 12:46 Uhr44