Filter
Top Products
Frankfurt RCM 82
26
● Press the FM•T button F for at least
two seconds.
The set searches for the strongest FM
stations and sorts them on the ‘T’ stora-
ge level (Travelstore). Once the pro-
cess is finished, the car radio automati-
cally tunes in to the strongest
station.
If required, it is also possible to manually
store a station on the Travelstore level. If less
than six stations can be received, the free
buttons are represented by dashes for a
short moment.
Activating a Stored Station
If required, the memorized stations can be
activated at a keystroke.
● Choose the storage level (only FM).
For this, press FM•T F until I, II, III, or
T lights up on the display G c.
● Briefly press the corresponding preset
button C.
Briefly Sampling a Station
(Radio Scan)
Starting with the currently tuned in station,
you can have the following ones briefly sam-
pled for approx. eight seconds each.
● Press the Scan button 1 for approx.
1 sec.
The display G a gives you ‘SCAN’. If
the following station is found, it is repro-
duced for approximately eight seconds.
The station’s frequency starts blinking
on the display G a; if it has already
been memorized, the corresponding
preset button starts blinking on the dis-
play G d. In addition, for FM stations,
the storage level indicator lights up on
the display G c. Then the set starts
searching for the next station.
For selecting a sampled station:
● Press the Scan button 1 once again.
The Scan function is off.
After the search operation has been con-
cluded, and no station has been chosen, the
radio starts playing the station from which
Radio Scan was started before.
Sampling Memorized Stations
with PS
All memorized stations of a waveband can be
briefly sampled.
● Press the PS button B.
The car radio will then start introducing
all memorized stations of the selected
waveband one after another.
If no station is stored on a preset but-
ton, this button is skipped.
If you want to cancel this function:
● Press the PS button B once again.
The radio keeps playing the sampled
station.
Reception of Traffic Program-
mes with RDS-EON
Various FM broadcasters transmit traffic an-
nouncements at some time of the day. Your
radio identifies these traffic programme sta-
tions and gives the TP indication - Traffic
Programme - on the display G l. Other radio
networks do not air traffic messages by them-
selves, but transmit the TP code of another
radio network with traffic information service
(e.g. BBC2).
If the ARI function is activated (ARI illumina-
tes on the display G n), your radio will auto-
matically switch to the traffic programme
station (e.g. GLR) for the duration of the
traffic announcement and will switch back
again to the previous station (BBC2) after the
end of the message. Traffic messages are
‘put through’ with a preset volume, the level
of which can be programmed (see chapter
‘Programming’). The set automatically inter-
rupts cassette or CD playback and resumes
play as soon as the message is over.