Filter
Top Products
Frankfurt RCM 82
24
Switching from Stereo to Mono
For switching from stereo to mono:
● Press the lo button 7 for more than
two seconds.
For stereo reproduction, the stereo sign
will light up on the display G f.
When switching the unit on, stereo sound
reproduction is adjusted.
When the signal strength gets poor, the set
will automatically switch to mono.
Loudness
At low volumes, the human ear shows redu-
ced sensitivity to low frequencies, while me-
dium and high frequencies can be perceived
better.
The loudness function compensates this phe-
nomenon by boosting the low frequencies.
For activating or deactivating it:
● Press the LD button 4.
If the loudness is on, ‘LD’ is shown on
the display G i.
You can individually programme at which
level you want the set to start boosting the
basses (see chapter ‘Programming’).
Radio Section
In the FM mode, we generally recommend to
make use of the RDS service.
As soon as a programme can be identified,
the station logo and possibly the regional
identification, e.g. the German NDR1 NDS
(for Lower Saxony) appear on the display.
Withe RDS, the preset buttons become pro-
gramme buttons. Now you know exactly
which programme your set has currently tu-
ned in, making it thus very easy to choose the
desired station.
AF - Alternative Frequency
The AF function (Alternative Frequency) pro-
vides that the car stereo automatically tunes
in to the programme frequency which offers
the best reception quality.
This function is on, if AF lights up on the
display G h.
Switch AF on/off by
● pressing the AF button 6.
The radio reproduction is muted for a mo-
ment while searching for the frequency offe-
ring the best reception quality of a program-
me.
Selecting the Desired Waveband
With your car radio you have free choice from
the following wavebands:
FM (ultra-short wave; frequency-modulated),
MW (medium wave), and LW (long wave).
Selecting FM
● Briefly press the FM•T button F.
‘FM’ lights up on the display G b.
Selecting MW or LW
● Briefly press the M•L button D.
‘M’ for MW or ‘L’ for LW lights up on the
display G b.
For changing between MW and LW:
● Press M•L D once again.
If nothing else is indicated, the following
operating notes hold for all wavebands.
Tuning in a Station Automatical-
ly
Tuning in the Following Station
● Press the upper part of the rocker
switch
/ J.
The car stereo automatically starts
searching for the next station.
Tuning in the Previous Station
● Press the lower part of the rocker
switch
/ J.
The car radio automatically starts sear-
ching for the previous station.
If the rocker switch
/ J up/down is
kept depressed, the station seek opera-
tion continues to be carried out quickly
in the corresponding direction.