Blaupunkt RCR 45 Car Stereo System User Manual


 
25
Verona RCR 45
ENGLISH
DEUTSCH
FRANÇAIS
ITALIANO
NEDERLANDS
SVENSKA
ESPAÑOL
PORTUGUÊS
Automatic tuning
Up
Down
/ Up/down in short intervals
(“AF” must be switched off)
/ To scroll through the broadcasting
network when “AF” is activated
(e.g. NDR1 ... NDR4).
Manual tuning << >>
(prerequisite: AF is switched off!)
Press << >>; the frequency will change
in short intervals in downwards or up-
wards direction.
When holding the right or left part of the
rocker switch pressed down, the frequency
scan is speeded up.
Scrolling through the broad-
casting network (only FM)
You can use the << >> buttons to tune in
stations of your reception area.
If several programmes of one broadcasting
network can be received, you can scroll
through them in forwards direction pressing
>>, or backwards using the << button, e.g.
NDR 1, 2, 3, 4, N-JOY (North German broad-
caster).
For this it is necessary that the stations have
been received at least once and that “AF” has
been activated before (lights up in the dis-
play).
For this purpose, you may start Travelstore
seek operation:
Press FM
T for 2 seconds; the system
starts to run through the frequency
band.
If “AF” does not light up,
press AF.
With this, the requirements for selecting sta-
tions with << >> are fulfilled.
Changing the memory bank (FM)
You can shift between the memory banks I, II
and T in order to store stations and recall
them later.
The currently selected memory bank is indi-
cated in the display.
Press the FM
T button as many times
until the desired memory bank lights up
in the display.
Storing stations
On FM, you can store six stations on the
preset buttons 1 to 6 for each of the memory
banks I, II and T.
On MW/LW, you can store six stations each.
Select the waveband with FM
T or M•L
and on FM also the desired memory
bank (with FM
T).
Tune in a station with the rocker switch
(either automatically or manually).
Press the desired preset button until
the radio resumes play after the muting
(takes approximately 2 seconds, confir-
med by beep).
Now the station has been stored.
The activated preset button is indicated in the
display.
Notice:
Should you tune in a station which has alrea-
dy been stored before, the corresponding
preset button and the memory bank will briefly
flash in the display if you have selected
another memory bank.