Filter
Top Products
23
Verona RCR 45
ENGLISH
DEUTSCH
FRANÇAIS
ITALIANO
NEDERLANDS
SVENSKA
ESPAÑOL
PORTUGUÊS
• Press the KeyCard in, which releases
the card and puts it in the proper positi-
on for being removed.
• Remove the first KeyCard and insert
the new one while “CHANGE” is still
being displayed.
Now you can also use the new KeyCard for
operating your unit.
A maximum of two cards can be used per set.
When trying to “define” a third one, the sy-
stem will automatically delete the access
authorisation of that KeyCard which was not
used for the “learning” process.
Displaying the radio pass data
You can use the KeyCard supplied with the
unit to display the individual radio pass data
such as the model name, the type number
(7 6 ...) and the serial number:
• Press and hold down preset buttons 1
and 6 while switching on the unit.
• Press the M•L button within 2 seconds.
The radio pass data will move through the
display several times.
To quit the function:
• Press any button.
Optical indication for extra
security
When the car is stationary, the KeyCard
tongue can be switched to flash for extra anti-
theft security.
For this, the following requirements must be
fulfilled:
Permanent 12 V supply and the + ignition
lead must be connected correctly (as illustra-
ted in the installations instructions).
“LED 1” must be adjusted in the DSC mode.
Please refer to chapter “DSC programming -
LED”.