Filter
Top Products
Kiel RD 104
24
Storing the strongest stations
automatically with Travelstore
You can use the Travelstore memory bank to
automatically store the six strongest FM sta-
tions sorted on the preset buttons according
to their signal strength. This feature is espe-
cially useful when travelling, because it will
always give you the most powerful stations at
a fingertip as you pass through the various
reception areas.
• Press TS for at least 2 seconds.
The radio will seek the most powerful FM
stations and store them on the “T” memory
bank (Travelstore). As soon as this procedu-
re has finished, the first station will be played.
FM stations can also be stored manually on
the Travelstore memory bank (see “Storing
stations”).
Recalling stored stations
You can recall any stored station by pressing
the corresponding preset button.
• Select FM or TS and with FM also the
desired memory bank.
For this purpose, press FM until the
desired memory bank is indicated on
the display.
• Briefly press the corresponding preset
button.
Sampling stored stations briefly
with Preset Scan
Use the Preset Scan function to briefly sam-
ple all stations stored under FM or TS.
• Press FM or TS.
• Press PS,
the set will then sample all the stored
stations, with FM on all memory banks.
Free preset buttons will be skipped.
To switch off Preset Scan:
• Press PS once again.
The system will continue to play the
currently sampled station.
Sampling stations briefly with
Radio Scan
Starting with the currently played station, you
may let the system sample the following ones
one after another.
To activate Scan:
• Press PS for about 2 seconds.
The sampled frequency or the station
name starts flashing in the display.
During the actual search process,
“SCAN” is flashing.
To continue listening to a sampled sta-
tion/switch Radio Scan off:
• Briefly press PS.
If no station is selected during the search
operation, the scan function will be automa-
tically switched off after the entire frequency
band has been passed through. The radio
will then return to the initial station that was
being played when the scan function was
activated.
For more information, please also refer to
chapter “DSC programming - SCANTIME”.