Filter
Top Products
Kiel RD 104
26
CD operation
Inserting the disc
• Switch on the set.
• Insert the CD (label side facing up) wi-
thout applying force.
The disc is automatically pulled into the set to
reach the playing position. CD reproduction
starts.
Ejecting the disc
• Press the / SRC button for more
than 1 second. The CD is ejected.
To protect the CD mechanism, the automatic
insertion and ejection of the disc must not be
impaired in any way.
Selecting a track
As soon as the disc is inserted, the activated
CD functions will be shown in the display.
Use the
or rocker switch to select the
desired title.
• Press rocker switch
to skip titles.
• Press rocker switch
to repeat titles.
If the
rocker switch is only pressed once,
the system will go back to the beginning of the
currently played title and repeat it, provided
that this track has at least been played for 5
seconds.
The rocker switch is designed as a sequence
switch, i.e. several tracks can be skipped at
a time by pressing it repeatedly. The display
shows “T” (track) and the corresponding
number of the currently selected track.
Cue (Fast forward):
• Keep depressed the rocker switch >>.
Review (Fast backward):
• Keep depressed the rocker switch <<.
Sampling tracks automatically
with CD SCAN
This function allows you to sample all CD
tracks one after another.
To activate the scan function,
• press the PS button for about
2 seconds.
The display shows “CD SCAN”.
The following tracks will be scanned
one after another.
To continue listening to the sampled track,
• press the PS button once again.
The set will then continue to play the
track currently being sampled.
For more information, please also refer to
chapter “DSC programming - SCANTIME”.
The Mix function
When the Mix function is activated, the CD
tracks will be played at random. The display
will then show “MIX”. To skip a title, press
rocker switch
.
To switch Mix function on and off:
• Press the MIX button.
Changing the audio source with
SRC
When you have inserted a CD, you can
change between CD or radio reproduction.
To switch over,
• press the
/ SRC button.