Blaupunkt RD 169 Car Stereo System User Manual


 
40
CLK. 12/24 Switches between 12-h and
24-h clock display.
DISP. ON/OFF. Here you can set
the clock to permanent dis-
play when the audio system
is switched off. The clock
display will remain visible
until the ignition is switched
off.
EQ ON/OFF Switches the equalizer
functions on and off.
HICUT Reduces interference under
poor reception conditions by
cutting the treble.
Select “NO HI-CUT” or
“HI-CUT 1, 2 or 3”.
3 = cuts the treble the most.
LO-DX Adjusts seek tuning sensiti-
vity.
“LO” stands for local recepti-
on.
“DX” stands for distant re-
ception.
Select “LO 3” if you want to
receive strong stations in
the local area, select “DX 1”
if you want to tune into wea-
ker stations which are furt-
her away.
LOUDNESS Loudness boosts the bass
frequencies at low volume.
LOUD 1 - Low boost
LOUD 6 - Max. boost
MUTE It is possible to lower the au-
dio volume quickly at the
touch of a button. Here you
can program the volume to
which the audio will drop.
PEAK PEAK ON: Displays the dy-
namics of the music signal.
PEAK OFF: Permanent dis-
play for the volume
PTY LANG Allows you to select bet-
ween German and English
for the display of the pro-
gramme types.
REG To listen to a regional radio
programme outside of its
RDS transmission range,
switch on “REG ON”.
For full RDS service, switch
to “REG OFF”.
SCANTIME Use this function to set the
scan time for the radio or
CD player from 5 to 20 se-
conds.
STEREO
/MONO Switches between stereo
and mono manually. The
mode selected will appear
briefly in the display. The
car audio system will select
“STEREO” playback auto-
matically each time it is swit-
ched on.
TA. VOL Adjusts the volume for traffic
announcements and the
warning beep.
The message will be heard
at this volume, if the stan-
dard volume is lower.
If the standard volume is set
higher than the TA VOL le-
vel, then the traffic report
will be played at the stan-
dard volume.
ON VOL Sets the turn-on volume. If
set to “VOL 0”, the unit will
automatically play at the vo-
lume last selected before it
was switched off.
Press “DSC” to save any changes made in
the settings and to quit the “DSC” menu.
BA Grenoble RD169 gb 95%® 30.05.2002, 10:59 Uhr40