Filter
Top Products
27
ENGLISH
DEUTSCH
FRANÇAIS
ITALIANO
NEDERLANDS
SVENSKA
ESPAÑOL
PORTUGUÊS
If you do not make any adjustments to
the tone within 8 seconds, the AUD
mode will quit automatically.
LD - Loudness
Loudness boosts the bass frequency
at low volume.
Loudness on/off: Press AUD until you
hear a beep.
: DSC (Direct Software Control)
Using “DSC” you can adjust pro-
grammable basic settings to suit your
own personal preferences.
Refer to the section on “DSC pro-
gramming” for more information.
; Clock display
When the unit is switched on press
“DIS” briefly and the current time will
appear in the display for approximately
8 seconds.
Additional function for clock display:
Press and hold “DIS” until you hear a
beep to display the time permanently.
If you activate another function, the
time will disappear from the display for
approximately 8 seconds.
< Preset buttons 1 to 6
Radio mode
You can store up to six stations in
each memory bank (I, II, and “T”).
On MW and LW you can also store six
stations each.
Storing stations
Tune the radio into the station you
would like to store. Press the preset
button on which you want to store this
station (radio will switch to mute) and
hold it down until the radio becomes
audible again and you hear a beep.
Recalling stored stations
Select the waveband and, on FM the
memory bank (“I”!, “II”, or “T”) as well.
Then press the corresponding preset
button 1-6 briefly to listen to the station
stored there.
Additional function for the station
preset buttons
Storing and recalling the PTY program
type.
When PTY is active (“PTY” will appear
in the display), then you can store and
recall a program type (e.g. rock, pop,
classical, news, etc.) on each for the
station preset buttons for the FM wave-
band.
CD mode
3/ -Pause
Press the station preset button marked
3/ to interrupt CD playback. “PAU-
SE” will appear in the display. Press
button again to resume CD playback.
4/RPT - Repeat
Press the station preset button marked
4/RPT to repeat the CD track currently
playing.
“REPEAT-T” will appear briefly in the
display. “RPT” will light up in display
field 3.
The track title will repeat until 4/RPT is
pressed again or you press the rocker
switch to select a different track.
5/MIX
Press the station preset button marked
5/MIX to switch to MIX playback for the
CD currently playing. The tracks on the
CD will be played in random order.
The current setting is briefly indicated
in the display: “MIX CD” will flash
briefly in the display and “MIX” will ap-
pear in display field 3.
Press 5/MIX again to switch this
function off.
BA Grenoble RD169 gb 95%® 30.05.2002, 10:59 Uhr27