Filter
Top Products
45
ENGLISH DEUTSCHFRANÇAISITALIANO
NEDERLANDS
SVENSKAESPAÑOL
PORTUGUÊS
b) Using the <</>> buttons on the rocker
switch
When “PTY” is switched on, you can select
a programme type using buttons <</>>.
• Press << or >>; the programme type
selected last will be displayed for 3 se-
conds.
• During this period press >> (forwards)
or << (backwards) to select the desired
type.
• Press << or >> as many times as re-
quired.
• If you would like to listen to a station
with the selected PTY, press
/ to
start the seek tuning function.
If the radio is unable to find a station offe-
ring the selected programme type, the dis-
play will show “NO PTY” and a beep will be
emitted. The radio will select the station
which was tuned into before seek tuning was
activated.
Storing programme types
Each of the preset buttons 1-6 has been
assigned one programme type at the facto-
ry.
If desired, you can also replace these with
other available programme types.
To do so, make sure that “PTY” lights up in
the display.
• If necessary, press the “PTY” button to
switch on the function.
• Select a programme type using but-
tons <</>> and hold down the desired
preset button (1-6) until you hear a
beep.
Now the selected programme type can be
recalled by pressing this preset as long as
“PTY” lights up in the display.
Scanning stations with PTY
SCAN
Important: “PTY” must appear in the display.
• Press “SC”.
All of the stations in your current reception
area offering the selected programme type
will be scanned.
To switch off PTY-SCAN:
• Press “SC” or the rocker switch again.
PTY priority
Situation:
PTY is switched on and lights up in the dis-
play.
No station offering the selected programme
type can be found currently in your recepti-
on range (with seek tuning or scan).
The set will switch back to the station pre-
viously tuned into.
As soon as it is possible to receive a pro-
gramme in the broadcast network with the
PTY selected, the radio will switch over to
the corresponding station for the duration
of the programme.
Example:
- Station playing: NDR3.
- “PTY” lights up in the display.
- Programme type “POP” selected.
- Seek tuning is started.
- No station with “PTY-POP” can be found.
- The display shows “NO PTY” and
- automatically switches back to NDR3.
- NDR2 airs a “PTY-POP” programme.
- The radio will switch to the linked stati
on NDR2 for the duration of the “POP”
programme.
During CD operation, the set will also switch
to the radio programme if the selected PTY
becomes available within the broadcast net-
work.
After the PTY programme has ended the
system will switch back to the previous mode
(radio or CD).
Note:
As already mentioned, these functions are
only supported by a limited number of RDS
stations at the present time.