Filter
Top Products
47
ENGLISH DEUTSCHFRANÇAISITALIANO
NEDERLANDS
SVENSKAESPAÑOL
PORTUGUÊS
CD operation
This car audio system is also equipped with
a CD player.
Note:
Use only perfectly circular CDs with a dia-
meter of 12 cm.
CDs with a diameter of 8 cm or CDs manu-
factured in the shape of a butterfly or a beer
mug, for example, are not suitable for use
with this equipment.
Using such CDs can very likely result in the
destruction of the CD and the CD drive.
We assume no responsibility for damages
caused by using unsuitable CDs.
Switching on the CD mode
CD is inserted, “CD” lights up in the display.
Press “SCR” to switch the audio source:
• Press “SRC” as often as necessary un-
til the CD functions appear in the dis-
play (track number and elapsed play-
ing time).
Inserting a CD
• Switch the car audio system on.
• Insert a CD (label facing up) gently into
the CD slot.
The CD will be automatically transported to
its playing position. CD playback will begin.
Removing a CD
• Press the “Eject” button briefly.
The CD will eject.
Do not interfere with the automatic CD in-
sert/eject function in any way as this might
damage the mechanism.
If you do not remove the CD, it will be pul-
led back into the unit after approximately 30
seconds.
Selecting a track
After you insert a CD, the CD functions will
appear in the display.
/ Select track:
Up
Down
If is pressed only once the unit will
return to the beginning of the track
currently playing.
>> Fast forward, audible (CUE)
Hold >> pressed down for as long as
necessary.
<< Fast reverse, audible (REVIEW)
Hold << pressed down for as long as
necessary.
The rocker switch acts as a successive
switch, i.e. press it repeatedly to skip over
several tracks.
The number of the track currently selected
will appear beside “T” in the display.
CD-MIX operation
You can play back the tracks on the CD in
random order. Press “5/MIX” on the station
preset buttons briefly to switch the function
on and off. “MIX” is switched on when “MIX
CD” appears briefly in the display when you
switch audio sources and each time the CD
track changes.
CD-PAUSE
Press the station preset button marked
3/
to interrupt CD playback. “CD-PAUSE”
will appear in the display.
Press this button again to cancel the pause
function. The CD programme will continue
on from where it left off.