Filter
Top Products
14
02
Installation
Detach the Unit
1.Take out the Outer Trim Frame.
Detach the front panel before disassembl-
ing the unit.
2.Insert the keys supplied to the unit at
both sides of the unit (shown as illustrated)
until they click. Pulling the keys makes it
possible to remove the unit from the dashboard.
Main Parts List
Mounting Sleeve x1 Rear Mounting Bolt x1
Harness Rubber x1
Keys x 2
Outer Trim Frame x 1
Connecting Wire x1
Steel Bar x 1
4 Screws
M 5 x 5
£p
5 Screws
M 5 x 20
£p
9
USB Connecting Wire
(optional)
06
35
CD/MP3/SD/USB
During CD status, press OSD button the
display shows:
Single elapsed
Total
elapsed
Total
remain
Single remain
Note:
* This function is operated by using the remote
control.
On Screen Display
* Pressing in the monitor also performs the
same function.
Pause the Playback
During CD/MP3/SD/USB playback, Press
to switch between play and pause.
Note:
Press ( or ) on remote control to
perform fast rewind or fast forward.
Skip backward/forward/F.F
/F.REW the playback
20
2X 4X 8X 16X
Note:
* This function is operated by using the remote
control.
Program Playing
During CD mode, press PROG, the TFT
displays the program menu. Press NUMBER
BUTTONS to select the track Number and
then press to move the cursor to START.
Press ENTER to start program playing.
Move the cursor to EXIT and press ENTER
to exit the program playing. Move the cursor
to and press ENTER to the previous page;
move the cursor to and press ENTER to
the next page. During this process, press
to cancel the program playing.
13
18
The function is only valid on remote control.
Note:
*
27
* Press CLEAR to clear the mistake input.
22
Eject SD Card
Push SD card to eject it.
During SD Mode:,ejecting the SD card will
switch the unit to DISC mode. If there is
no disc, the unit will switch to USB Mode.
If no USB, the unit will switch to Radio mode.
Eject USB
Pull out the USB to eject it.
During USB Mode, removing the USB will
switch the unit to Disc. If there is no DISC,
it will switch to Radio mode.