Filter
Top Products
Radio Operation
FM Reception
For enhanced FM performance the
®
tuner includes signal actuated stereo control and
Multipath noise reduction circuits.
Listening to the Radio
1) Press the FNC button and select the radio
mode. The radio turns on.
2) To tune in a preset station, first press the
BND button and select FM1, FM2, FM3 or
AM.
The band changes as follows each time the
BND button is pressed:
FM1
➜ FM2 ➜ FM3 ➜ AM ➜ FM1
3) Use the Preset buttons to select the
desired station.
Seek Tuning
1) Press the BND button and select the
desired band.
2) The seek tuning mode is set when “
SRCH” is
lit on the display.
3) Press the Left or Right button . Seek tuning
automatically stops when a station is found.
Manual Tuning
1) Press the BND button and select the
desired band.
2) Press the BND button again for more than 2
seconds. “
SRCH” turns off and the manual
tuning mode is set.
3) Use the Left and Right buttons to tune in
the desired frequency.
Presetting Stations
A total of 24 stations can be preset, 6 each for
the FM1, FM2, FM3 and AM bands.
Note:
•
When a station is preset, the station previously stored
in the memory at that position is cleared.
Presetting stations manually
1) Press the BND button to select the band
at which to store the station.
2) Use the Left and Right buttons to tune in
the station to be preset.
3) Press the Preset button at which you want
to store that station for at least 2 seconds.
Auto store function (Automatic Station Store)
1) Press the BND button to select the band
at which to store the stations.
2) Press the AS button . Stations with good
reception are automatically stored at Preset
buttons 1 to 6.
*
If there are fewer than 6 stations with good recep-
tion, the stations previously stored at the remain-
ing buttons are not cleared.
Preset Scanning (Preset Station Scan)
When the PS button is pressed, the preset
memory numbers flash and the stations are
tuned in for 7 seconds each in the order in which
they were stored. Press the PS button again to
cancel the preset scanning mode.
Instant Station Recall (ISR) Function
This function allows you to recall a specific radio
station from any mode. Use it to find stations
quickly when you want to hear specific informa-
tion (such as traffic announcements) while dri-
ving. The ISR station is set to 87.9 MHz upon
shipment from the factory.
Setting the ISR station
1) Press the FNC button to select the radio
mode.
2) Tune in the station to be set as the ISR sta-
tion.
3) Press the ISR button for more than 2 sec-
onds to store that station in the memory as
the ISR station.
Recalling the ISR station
Press the ISR button from any mode. “ISR”
appears on the display and the set station is
tuned in. To cancel, press the ISR button again.
9
9
5
7
11
8
18
11
20
18
20
18
20
18
11
18
5
10
English