Clarion DB185MP Car Stereo System User Manual


 
Basic Operations
English
14 DB185MP
Sound Adjustment
You can adjust a sound effect or tone quality to
your preference.
Setting the Z-Enhancer Plus
This unit is provided with 4 types of sound tone
effects stored in memory.
Select the one you prefer.
The factory default setting is “OFF”.
2-1. Select “Z-EHCR+”.
3-1. Each time you turn the [ROTARY] knob,
the tone effect changes in the following
order:
OFFB-BOOSTIMPACT
EXCITECUSTOM
OFF : no sound effect
B-BOOST : bass emphasized
IMPACT : bass and treble emphasized
EXCITE : bass and treble emphasized
mid emphasized
CUSTOM : user custom
When “B-BOOST/IMPACT/EXCITE” is set:
3-2. Press the [ ] button.
3-3. Turn the [ROTARY] knob to adjust the
setting in the range of
3 to +3.
The factory default setting is “0”.
3-4. Press the [ ] button to return to the
previous mode.
When “CUSTOM ” is set:
3-2. Press and hold the [ ] button for 1
second or longer. Bass/treble
characteristics become flat and “FLAT” is
show in the display.
3-3. Turn the [ROTARY] knob to change to the
OFF” mode.
Adjusting the bass
This adjustment can be performed only when
the Z-Enhancer Plus is set to “CUSTOM ”.
2-1. Select “BASS”.
3-1. Press the [ ] button.
3-2. Press the [x] or [v] button to select as
following order.
B<G 0>B<F 60>Q 1
3-3. Turn the [ROTARY] knob to adjust the
gain, the F (center frequency) and the Q.
B<G 0> :The factory default setting is “0”.
(Adjustment range:
+7 to 7)
B<F 60> :The factory default setting is
60”.
(Adjustment range: 60/80/100/
200)
Q 1 :The factory default setting is “1”.
(Adjustment range: 1/1.25/1.5/2)
3-4. Press the [ ] button to return to the
previous mode.
To change sound setting
1. Press the [SOUND] button to switch to the
sound adjustment selection display.
The factory default sound setting is “Z-
EHCR+”.
2. Then press the [x] or [v] button to
select the sound adjustment mode.
Each time you press the [x] or [v]
button, the sound adjustment mode
changes as following order:
Z-EHCR+BASSTREBLE
BALANCEFADERNF VOL
In the case of display blinking “ENT”, you
can press the [] button to adjust the
setting value.
The sound adjustment mode will be
displayed for 2 seconds before showing the
sound setting.
3. Turn the [ROTARY] knob to adjust the
selected audio mode.
4. After completing settings, press the
[SOUND] button to return to the previous
mode.