Filter
Top Products
9
Disc Playback
DVD playback will often begin automatically when the disc is inserted. With some DVD
discs, you will need to press [ENTER] or [ ] to begin playback.
CD-Audio discs will begin playback automatically. CDs with MP3 files may
require you to navigate the file structure menu. For more information, see MP3
Playback on CD-R Discs.
Stopping Playback
There are two ways to stop playback: Pressing [ ] once will stop playback, and the
OHMD74 will store the location last played on the disc. Playback can be resumed at
the same point on the disc by pressing [ ]. Pressing [ ] twice will stop playback
and clear the OHMD74 memory of the last point played on the disc. Pressing [ ] at
this point will cause the OHMD74 to begin playback from the beginning of the disc.
Selecting a Track or Chapter
Selecting tracks or chapters can be accomplished by either using the IR remote
or front mounted controls. These controls allow the operator to skip over
undesired tracks or repeat a particular track.
Advancing Tracks / Chapter: Press the insert up arrow until desired track /
chapter is found.
Repeating Previous Tracks / Chapter: Press the insert down arrow until
desired track / chapter is found.
Note: For some VCD 2.0 discs, the insert up arrow and insert down arrow
functions may not be available.
OHMD74 Final Manual.qxd 6/17/2004 5:33 PM Page 9