VRX630 23
English
Owner’s manual
DVD Changer Operation
Switching to a next disc(Disc Up
function)
The disc up function plays from the first track
(track No1) of the next disc.
1. Press the BND button %.
2. Each time you press the BND button %, the
disc changes to the next disc.
Changing over display size
∗ This function is available only when the panel is
open.
Notes:
• This function is not available while you are driving.
• Switch to the VTR/TV/DVD video/DVD changer
mode you see.
1. Press the DISP button @ for 1 second or
longer to change over the monitor display
size. Each time you press the DISP button
@, the monitor display size changes in the
following order:
“NORMAL” ➜ “WIDE” ➜ “F. WIDE” ➜
“CINEMA” ➜ “NORMAL”
● “NORMAL”: (normal display)
There is a black area at both right and left
ends of a display. In case of normal TV
broadcasting (4:3), the image can be shown
without being cut or deformed.
● “WIDE”: (wide mode)
The image at right and left ends in a display
elongates horizontally.
● “F. WIDE”: (full wide mode)
The whole image elongates horizontally.
● “CINEMA”: (cinema mode)
The image at both top and bottom in a dis-
play disappears.
Notes:
• When a normal 4:3 size image, not being a wide
one, is viewed by displaying it fully on a wide moni-
tor display in a wide mode or a full-wide mode, a
part of the peripheral image will be lacking or de-
formed. In deference to the intention of producer,
an original image can be viewed in a normal mode.
• During superimposed display, it becomes a full-wide
mode.
DVD changer functions
When an optional DVD changer is connected
through the CeNET cable.
In this case, this unit only provides a part of the
DVD changer functions. As for other operations
not written in this manual, operates with a remote
control unit provided with your DVD changer. Refer
to the DVD changer owners’ manual for details.
This unit can control a total of 2 changers (CD
or MD or DVD).
Press the FNC button 1 and select the DVD
changer mode to start play.
∗ If “NO MAGAZINE” appears in the display, insert
the magazine into the DVD changer.
“DISC CHECKING” appears in the display while
the player loads (checks) the magazine.
∗ If “NO DISC” appears in the display, eject the
magazine and insert discs into each slot.
Then, reinsert the magazine back into the DVD
changer.
Pausing Play
1. Press and hold the PLAY/PAUSE button 3
to pause play. “PAUSE” appears in the dis-
play.
2. To resume play, press the PLAY/PAUSE but-
ton 3 again.
∗ When the panel is open, the same operation
is also available by using the PLAY/PAUSE
button 3 in the panel.
Slow Play (DVD video & video CD)
1. Press and hold the PLAY/PAUSE button 3
then press and hold the d button 2. While
the button is being pressed, slow playback
continues at the speed 1/2 times the normal
playback.
∗ Slow playback cannot be performed in the
backward direction. In addition, audio cannot
be reproduced during slow playback.
Selecting a disc
1. Each of the DIRECT buttons # corresponds
to a disc loaded into the magazine.
2. Press the corresponding DIRECT buttons #
(1 to 6) to select the desired disc.