Filter
Top Products
VRX630 33
English
Owner’s manual
● Auto loudness adjustment
Operate the JOYSTICK ¡ upward or downward
to adjust an auto loudness level (0 to 10).
● Woofer out adjustment
Select woofer output out of “STEREO”,
“MONO”, or “OFF”.
Operate the JOYSTICK ¡ upward or downward
to select a desired item, and then press the ENT
at the center of the JOYSTICK ¡ to set it.
● Woofer LPF adjustment
Select woofer LPF slope out of “50Hz”, “80Hz”,
“120Hz”.
Operate the JOYSTICK ¡ upward or downward
to select a desired item, and then press the ENT
at the center of the JOYSTICK ¡ to set it.
● HPF adjustment
Select HPF slope out of “50Hz”, “80Hz”,
“120Hz”, or “OFF”.
Operate the JOYSTICK ¡ upward or downward
to select a desired item, and then press the ENT
at the center of the JOYSTICK ¡ to set it.
● Test Tone Output
Select Test Tone Output
Operate the JOYSTICK ¡ upward or downward
to select a desired item, and then press the ENT
at the center of the JOYSTICK ¡ to produce a
test tone.
4. After adjustment (setting), operate the JOY-
STICK ¡ rightward or leftward to move the
cursor to “MENU” and press the ENT at the
center of the JOYSTICK ¡ to return to the
adjustment selection display.
5. Press the ADJ button * again to return to
the STANDARD display.
Selecting the standard mode or the
professional mode
∗ The factory default setting is “STD”.
1. Press the ADJ button * to switch to the ad-
justment selection display.
2. Operate the JOYSTICK ¡ upward or down-
ward to select “DSF/EQ”. “STD” and “PRO”
items are displayed in the menu bar.
3. Operate the JOYSTICK ¡ rightward or left-
ward to select a desired mode and press the
ENT at the center of the JOYSTICK ¡ to set
the mode thus selected.
4. After setting, press the ADJ button * again
to return to the STANDARD display.
Woofer level adjustment
You can adjust an output sound level of
subwoofer.
1. Press the A-M button & to show the AUDIO-
MODE display.
2. Operate the JOYSTICK ¡ upward or down-
ward to select “W-VOL” and press the ENT at
the center of the JOYSTICK ¡ to show the
woofer level adjusting display.
3. Operate the JOYSTICK ¡ upward or down-
ward to adjust the level (0 to 14).
4. After adjustment, operate the JOYSTICK ¡
rightward or leftward to select “MENU” and
press the ENT at the center of the JOY-
STICK ¡ return to the AUDIO-MODE dis-
play.
Standard mode/Setting the
listening position
Selection of listening position
1. Press the A-M button & to show the AUDIO-
MODE display.
2. Operate the JOYSTICK ¡ upward or down-
ward to select “POSITION”. “SELECT” and
“DETAIL” are displayed in the menu bar.
3. Operate the JOYSTICK ¡ rightward or left-
ward to select “SELECT”, and press the ENT
at the center of the JOYSTICK ¡ to show
Position selecting display.
4. Operate the JOYSTICK ¡ upward or down-
ward and press the ENT at the center of the
JOYSTICK ¡ to select a desired position.
5. Operate the JOYSTICK ¡ rightward or left-
ward to move the cursor to “MENU”, and
press the ENT at the center of the JOY-
STICK ¡ to return to the AUDIO-MODE dis-
play.
Detail adjustment of listening
position
1. Press the A-M button & to show the AUDIO-
MODE display.
2. Operate the JOYSTICK ¡ upward or down-
ward to select “POSITION”. “SELECT” and
“DETAIL” are displayed in the menu bar.
3. Operate the JOYSTICK ¡ rightward or left-
ward to select “DETAIL”, and press the ENT
at the center of the JOYSTICK ¡ to show
Position Detail adjusting display.
DSP operations