Filter
Top Products
BBAATTTTEERRYY RREEPPLLAACCEEMMEENNTT
NNOOTTEE::
Before using remote after installation, remove the battery plastic protective slip.
1. Move the small latch to the right and slide out the battery holder.
2. Remove old battery and replace it with a new battery (CR2025) with the positive “+” sign facing as
shown above.
3. Push battery holder back into its compartment until it is locked.
PPRREECCAAUUTTIIOONNSS
1. Properly dispose of used battery.
2. Do not misuse battery by shorting the positive “+” and negative “-” terminal or put it into fire.
Overheating may cause the battery to explode and cause a fire hazard.
3. If the remote is not to be used for a long period, remove the battery from the remote to prevent dam-
age from battery leakage.
4. To avoid accidents, prevent children from playing with the battery.
OOppeerraattiioonn
OOPPEENN——LLCCDD SSCCRREEEENN
To open the LCD screen press the OPEN/CLOSE button and carefully rotate the LCD
screen down to its operating position.
CCLLOOSSEE——LLCCDD SSCCRREEEENN
To close the LCD screen rotate the LCD screen up to its stored position until you
hear the OPEN/CLOSE button click.
Remote Controller
Battery
Battery Holder
Latch
+ side
1122
© 2004 Directed Electronics, Inc.