Filter
Top Products
OONN//OOFFFF CCOONNTTRROOLL
Press and hold the ( ) button on the LCD screen or momentarily press the POWER
button ( )on the remote.
FFUUNNCCTTIIOONN MMOODDEE ((MMEENNUU))
Press the MENU button ( ) on the LCD screen or the VIDEO MENU button on the
remote to display the following setup options:
COLOR
BRIGHTNESS
DIMMER (on/off)
FORMAT (full, normal, and zoom)
RESET (restore factory default settings)
Use the MENU button ( ) on the LCD screen or use the VIDEO MENU button on
the remote to scroll through the menu options. Once the desired setting is select-
ed use the UP/DOWN (S/T) buttons on the LCD screen or the MONITOR (S/T)
buttons on the remote to change the setting. After 5-seconds of inactivity the
MENU screen will turn off.
DDOOOORR LLIIGGHHTT OONN//OOFFFF
Press this switch on the LCD screen to have the door open sensor operate the dome
lights.
NNOOTTEE::
This feature is operational only if the Gray or Purple door lock trigger wires have been
connected to the door sensor.
The dome light selector switch contains two separate circuits. One for a positive
dome light trigger and one for a negative dome light trigger. Please refer to the
wiring table below for each of these triggers.
NEGATIVE DOME LIGHT TRIGGER
WWIIRREE CCOOLLOORR CCOONNNNEECCTTIIOONN
Gray Battery ground
Blue Battery +12VDC
Orange Battery +12VDC
Purple Negative door trigger
1144
© 2004 Directed Electronics, Inc.