Filter
Top Products
32D-Link DCS-910/920 User Manual
Section 3 - Configuration
Setup > FTP
FTP Server
Host Address:
Port Number:
User Name:
Password:
Directory Path:
Passive Mode:
This is the IP address of the FTP server that you will be connecting to.
Default is port 21. If changed, external FTP client program must change
the server connection port accordingly.
Specifies the user name to access the external FTP server. If you are to
upload snapshots to an FTP server you will need to fill in the Domain name
or IP address of your external FTP server. The following user settings must
be correctly configured for remote access.
Specifies the password to access the external FTP server.
Specifies the destination folder in the external FTP server.
Enabling passive mode will allow access to an external FTP server if your
camera is behind a router protected by a firewall.
In this section, you can configure a FTP server to receive the images.