Dual MXD105 Car Stereo System User Manual


 
2
MXD105 INSTALLATION
TYPICAL FRONT-LOAD 
DIN MOUNTING METHOD
REMOVAL KEYS
MOUNTING SLEEVE
INSTALLATION
MOUNTING KIT
OR DASHBOARD
HEAD UNIT
Preparation
Please read entire manual before installation.
Before You Start
•Disconnectnegativebatteryterminal.Consultaqualifiedtechnicianforinstructions.
•Avoidinstallingtheunitwhereitwouldbesubjecttohightemperatures,suchasfrom
directsunlight,orwhereitwouldbesubjecttodust,dirtorexcessivevibration.
Getting Started
•Removetrimringfromunit.
•Remove2transitscrewslocatedontopoftheunit.
•Insertthesuppliedkeysintotheslotsasshown,andslidetheunitoutofthemounting
sleeve.
•Installmountingsleeveintoopening,bendingtabstosecure.
•Connectwiringharnessandantenna.Consultaqualifiedtechnicianifyouareunsure.
•Certaininstallationsmayrequireaninstallationkitand/orwiring
harnessadapter(soldseparately).
•Testforcorrectoperationandslideintomountingsleevetosecure.
•Snaptrimringintoplace.